I wanted to take a minute and say thank you. Thank you for my friends and family who faithfully click the link to The Goon Room despite already getting the posts in email form just to boost the number of hits. Thank you for Word Press choosing to feature TGR on Fresh Pressed and thank you to all the new readers who have subscribed. Lastly, thank you for all the wonderful comments. I hope to bring a little laugh to your days for many years to come!
And now for some business! The delicious lettuce table featured in yesterday’s post was an obvious hit. So my sweet hubby Peter volunteered to write up the instructions for building the table for anyone that is interested. I will however warn you that the supplies may shock you.
When I asked Peter to build me the table, he was super excited. Little did I know that the process would include not only the supplies to build the table, but it would also include a new top-of-the-line miter saw. A table to mount the saw to. Several new tools including a staple gun (the version we already owned was not right, allegedly), clamps, saw horses and a lot of other crap that I’m sure came home from Lowes but was not shown to me. That said, the result was fantastic – I’m just saying that you’ve been warned! The measurements below can be adjusted. Our table is pretty big, but could be made into a much smaller version for a deck or balcony.
As far as planting, I found that loose leaf varieties of lettuce work great. Seedlings from the nursery didn’t do quite as well. Also spinach needs a little sandier and better draining soil. But the strawberries seem to be loving it so save a space for a few seedlings of berry goodness.
Supplies:
8 – 2”x4” boards (12’ long)
4 – 1”x4” boards (12’ long)
30 – 2 ½” Galvanized Deck Screws
24 – 1 ½” Galvanized Deck Screws
1- 2’ x 12’ Roll of Aluminum Window Screening
1- 2’ x 12’ Roll of Hardware Cloth
Mitre Saw (or a handsaw and some powerful biceps)
Staple Gun (with staples)
Drill (with bit to match screws)
Construction:
The first step in constructing your salad table is to cut your lumber into the following pieces (if you decided to us a hand saw, here is where you earn your keep):
2 – 2”x4”x12’ pieces
6 – 2”x4”x17” pieces
6 – 2”x4”x36” pieces
6 – 2”x4”x32” pieces
2 – 2”x4”x6’ pieces
2 – 1”x4”x12’ pieces
10 – 1”x4”x17” pieces
1. Now that your lumber is cut, place your two 2”x4”x12’ pieces of lumber on the ground (parallel to each other) about 17” apart.
2. Take two of your 2”x4”x17” pieces of lumber and place them between the 2”x4”s that are lying parallel on the ground so that you create a rectangle. Now use four of your 2 ½” galvanized deck screws to firmly secure the boards together.
3. Take your four remaining 2”x4”x17” pieces of lumber and place them between the 2”x4”s that are lying parallel to create five relatively equal planting areas. Now use eight of your 2 ½” galvanized deck screws to firmly secure the boards together.
4. Now you get to use everybody’s favorite tool – the staple gun. Roll out the hardware cloth and cover the bottom of your newly created rectangle with it. Attach the hardware cloth with staples.
5. Roll out the aluminum window screening and cover the bottom of your newly created rectangle (and the hardware cloth) with it. Attach the aluminum window screening with staples.
6. Now that the top of your salad table is complete, you need to construct legs for your table. Because the top of your salad table is rather heavy you want stout legs that will bear all that weight. To construct a table leg, take one of your 2”x4”x32” pieces and attach it to one of your 2”x4”x36” pieces with a 2 ½” galvanized deck screw. You want the pieces to lay on top of each other on the 4” sides, meet at the bottom and leave a 4” gap at the top. Repeat this process until you have six legs.
7. With the rectangle still on the ground, you can now attach the legs to the top of your salad table with the 2 ½” galvanized deck screws – three legs on each side, one in the center, one three feet to the left and one three feet to the right. The top of your salad table should rest on top of the 2”x4”x32” pieces and the 2”x4”x36” pieces should be on the outside of the table top.
8. With the rectangle still on the ground, attach two 1”x4”x12’ pieces of lumber over the hardware cloth/aluminum screening with 1 ½” galvanized deck screws. These pieces will give the table support and the table top won’t sag when you add soil.
9. With the help of another person (or if you’re the tough guy who decided to use a handsaw you can do this yourself) turn the table over. You can now attach the bottom shelf to your table. To do so, attach the 2”x4”6’ pieces of lumber to the front and back the table legs about halfway between the ground and table top with the 2 ½” galvanized deck screws. The 2”x4”x6’ pieces of lumber will not only provide a base for the shelf but will serve as a good brace for the table legs.
10. Now you can attach the ten 1”x4”x17” pieces of lumber to the 2”x4”x6’ pieces of lumber that you just added with the 1 ½” galvanized deck screws and create a slotted shelf – be aware that anything you put on this shelf will get wet when the table top drains.
My favorite part about this picture is the conversation that was happening went something like this:
Yummy candy buffet
The Phis, showing off their best moves
This picture needs little description. But I think it’s important to point out how Chrissy on left has just had champagne dumped on her as Amy dove for the bouquet. Also Katya is making a run for the flowers as Melissa kicks it away from both of them. Those girls mean business.
The Goon Room 