DIY Magnet Board

I think I might be on a roll.

Ok, I’m hoping I’m on a roll. I say this because I’ve just completed a project that I started before Auggie was born.

Yeah, that’d be 2 years for everyone doing the math.

Prior to moving home to AZ, our cute little hood in DC had curbside trash pick up. While out walking the dogs one afternoon, I saw our neighbors had thrown out a HUGE picture frame. Like huge. So I wrangled my hairy beasts and dumpster pile dove and took the frame home. I had visions of turning it into a damask fabric covered cork board that would hold hundreds of pictures in a casual yet totally planned way. It would look expensive and fabulous and I would looove to tell people that I made it for practically nothing!

Sadly because everything on HGTV always looks easier than it, my cork board didn’t come out quite right. It turns out that cork tiles are  little pricey. And I needed a ton. And even though I broke down and bought them, they didn’t have enough body to hold their shape on the fabric. And they were thin so when I finally got them to stay in place, the thumb tacks when right through the cork and into the wall. And when the door in the office was open and a breeze blew in, it blew down all my pictures because they weren’t really on the cork securely because the cork wasn’t really secure.

So after putting up with this for fourish years, I took it all apart with the idea that I would get sheet metal instead and use it as a magnet board.

I never learn my lesson.

It turns out that the metal they sell at Lowes and Home Depot is A. not magnetic and B. they won’t custom cut it for you. Then Auggie came and I got tired so my frame has been hanging on the wall of my office totally empty except for a few pictures Baylor taped to the wall because she thought it looked sad.

That is until this week. Well, last month. I decided that it was time to get it done. I had a vision of adding a few more frames to the wall and giving Bay a safe place to store her markers and crayons so that Auggie and Mason can’t get to them. And to be able to hang artwork and pictures that was breeze proof. Auggie and I took off to Hobby Lobby. I found their empty frames were half off. The fabric had a coupon and I found hooks on sale too. It was a sign. I’m not a fan of Hobby Lobby’s politics, but I can get behind a sale. Next I found a sheet metal company that would custom cut metal and it didn’t cost a fortune. And last night I was feeling ambitious so I got everything assembled – even with a few measurements that weren’t perfect, it came out pretty good!

photo 2 (39)

Here’s how I did it –

What you need:

Empty frame(s)

Fabric

Magnetic metal

Glue gun

Iron

Instructions:

1. Measure the inside of the frame (like where the glass would go). Go on the smaller side – you can always add fabric to fill it out but having to have a millimeter cut off would be annoying.

2. Call around to get a price on sheet metal. I used 20 gauge (because that’s what the guy said I should use) but I think it could have been a little thinner and have been just fine. Just make sure it’s magnetic. I also ordered mine unhemmed because it was cheaper and because I didn’t need a fancier edge.

3. Layout the metal on the fabric and line up the edges so the pattern of the fabric is straight. Cut leaving a 2-3 inch border to fold over.

4. Press the cut piece.

5. Laying the fabric pattern side down, line up the metal in the center again. Start folding over the edges and gluing into place in small sections (the metal is cold so the hot glue hardens really fast). Be sure that the metal is staying in place (I stood on mine) so the pattern is straight. Pull tightly so there are no creases.

6. Run a small amount of glue around the edge of the inside of the frame and place fabric and metal inside.

7. Hang on the wall and admire your work!

Other variations…paint the metal in bright color or with stripes. Paint with chalkboard paint (oooh). Create sections with paint and or fabric for each person in the family. Have the metal cut with two holes at the top to loop ribbon through as an alternative to the frame.

So now that my two year old project is done, I’m feeling motivated to tackle the ornament wreath I started making THREE years ago. Those assholes on Pinterest don’t tell you to paint the damn styrofoam ring before you start hot gluing ornaments to it. They also don’t tell you to use a much smaller ring than you think because it requires a ridiculous amount of ornaments and the thing is going to be 4 feet across and weigh 100 pounds if you use a big ring. I’m too far down the road to give up…so I’m going to go back and try to A. paint between the ornaments and B. add greenery where I can’t get paint. Wish me luck! Or wish me to have the guts to give up on the stupid thing. Either one works!

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s